ARDEX EG 800 F

Use as a moisture barrier - up to 100% RH and pH 14
High performance epoxy system designed for a variety of applications
Combining with selected ARDEX fillers to produce epoxy mortars/screeds

Images and Videos

Information
Information

ARDEX EG 800 F is a high performance multi-purpose epoxy system designed for environments that may require strict standards of hygiene, high chemical, and physical resistance.

Features

For tile grouting all natural stone and terrazzo

Used with ARDEX Floor Leveller Primer Sand, the ARDEX EG 800 F can be used for a variety of epoxy mortar applications

Used with ARDEX Gravel Mix, the ARDEX EG 800 F becomes a stable epoxy based screed

Used with ARDEX Aggregate 5/2mm, the ARDEX EG 800 F becomes an effective epoxy drainage screed
Technical Data
Technical Data

Uses:
For tile grouting all natural stone and terrazzo.
NOTE: Porous, moisture sensitive, and textured tiles may require special application procedures. Contact ARDEX Technical Services.

When combined with ARDEX Floor Leveller Primer Sand to create various consistencies, the ARDEX EG 800 F can be used for a variety of epoxy mortar applications such as waterproofing membrane terminations, or as a fast and effective epoxy patch repair.

When combined with ARDEX Gravel Mix, the ARDEX EG 800 F becomes a stable epoxy based screed with good workability and high strength.

When combined with ARDEX Aggregate 5/2mm, the ARDEX EG 800 F becomes an effective epoxy drainage screed with good compressive strength.

Packaging:

ARDEX EG 800 F Part A – 8L

ARDEX EG 800 F Part B – 4L

ARDEX EG 800 F Part C – 15kg ARDEX Colour Pack

NOTE: ARDEX EG 800 F Part C not required for epoxy mortar / screed / drainage screed applications.
Downloads

Downloads

Technical Datasheet

Safety Datasheet – Part A

Safety Datasheet – Part B

Safety Datasheet – Part C

ARDEX EG 800 F

Information

Technical Data

Downloads